4" Lift Kit - 11-16 F-250/F-350 4WD - Diesel - w/ SL Shocks

4in Ford Lift Kit | Diesel Gallery
4in Ford Lift Kit | Diesel Gallery 1
4in Ford Lift Kit | Diesel Gallery 2
4in Ford Lift Kit | Diesel Gallery 3
4in Ford Lift Kit | Diesel Gallery
4in Ford Lift Kit | Diesel Gallery 1
4in Ford Lift Kit | Diesel Gallery 2
4in Ford Lift Kit | Diesel Gallery 3

4in Ford Lift Kit | Diesel

Starting At*: $774 - $1,000
FREE Shipping on ALL ORDERS!*
*within the contiguous US; ground shipments only.
#K876
Price*: $859.89 $773.90
Strongly Recommended
Carrier Bearing Drop Kit - 99-19 F-250/F-350 4WD - 2-3" Rear Lift
#9649
$ 36.85
U-Bolt 4 Pack - 5/8 x 3 1/4 x 17 - Large Radius w/ Hardware
#11724
$ 57.15
U-Bolt 4 Pack - 5/8 x 3 1/4 x 19 - Large Radius w/ Hardware
#11734
$ 57.15
FREE Shipping on ALL ORDERS!*
*within the contiguous US; ground shipments only.
Superlift's typical processing time for orders is 24-48 hours. If there is an unforeseen delay you will be notified immediately.
Find a Dealer CALL 800-551-4955
CALL 800-551-4955
Find a Dealer CALL 800-551-4955
CALL 800-551-4955

Your Selected Product Fits These Vehicles

  • 2011-2016 Ford F-250 Super Duty DIESEL
  • 2011-2016 Ford F-350 Super Duty DIESEL
  • This is a complete coil spring suspension lift kit for the 2011-2016 Ford F-250/F-350 4WD – diesel engine
  • Provides 4” lift height
  • Includes track bar and radius arm drop brackets, rear blocks, front and rear Superlift shocks or rear 5100 Series Bilstein shocks
What does it include?
  • Front coil springs, track bar bracket, radius arm brackets, sway bar correction, shocks, rear block and u-bolt kit, and all hardware required specific to the 2011-2016 4WD Ford F-250 DIESEL ENGINE.
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation

This is the Superlift 4” suspension lift kit with Superlift shocks OR Bilstein Shocks for the 2011-2016 Ford F-250 and F-350 Super Duty 4WD – Diesel Engine.

OEM CAD models and the latest 3D design software were used to precision engineer a suspension system that includes a track bar relocation bracket, front sway bar correction, bump stop extension brackets, brake hose relocation brackets

The rear lift and all the necessary hardware is included to make certain this package is complete with everything you need to do the job right.

NOTE: If the Ford F-250 or F-350 Super Duty is equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required. Part # 9649

NOTE: This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250 and F-350 Super Duty with the factory 1-7/8" blocks WITHOUT top mount overloads. If your Ford is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required. For Super Duty’s equipped with the 1-7/8" blocks and top overloads, part # 11724 will need to be purchased in addition to the lift kit. If the truck is equipped with the 3.71” block and the top mount overloads, part # 11734 is required.

The 4" lift for the coil sprung Super Duty is achieved via engine specific coil springs to ensure proper lift height and maintain factory ride quality. Radius arm lowering brackets are used to restore proper caster angle/alignment. Other components included with the 4" system are front compression travel-stop relocation brackets, track bar relocation bracket, front anti-sway bar extensions, and a steering stabilizer bracket.

Tire Wheel Backspacing Offset
35 x 12.5 17 x 9 4.5 -
35 x 12.5 18 x 9 4.5 -
35 x 12.5 20 x 9 4.5 -

 

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

  • Installation time: 8 hours
  • Difficulty level: 3 of 5

NOTE: If the Ford F-250 or F-350 Super Duty is equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required. Part # 9649

NOTE: This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250 and F-350 Super Duty with the factory 1-7/8" blocks WITHOUT top mount overloads. If your Ford is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required. For Super Duty’s equipped with the 1-7/8" blocks and top overloads, part # 11724 will need to be purchased in addition to the lift kit. If the truck is equipped with the 3.71” block and the top mount overloads, part # 11734 is required.

 

WHAT IS THE DIFFERENCE BETWEEN SUPERLIFT AND BILSTEIN SHOCKS?

Superlift shocks are twin tube, velocity sensitive hydraulic shocks. Bilstein shocks are a mono-tube gas pressurized shock. The Superlift shocks are coated with a white paint; the Bilstein shocks are a brushed steel body with a nickel and clear zinc finish. Bilstein shocks are more tuned for the application and offer more precise valving.

Sorry, there are currently no reviews for this product

×