This is a complete knuckle spacer style lift kit for the 1989-1995 Toyota standard cab short bed pickup 4WD
Provides 4” to 5" adjustable lift height
Includes rear blocks, front and rear Superlift shock absorbers
What does it include?
All brackets, cross-members, knuckles, shocks, rear block and u-bolt kit, and hardware required specific to the 1989-1995 Toyota Pickup Short Bed Standard Cab Models Only.
Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation
California Residents: Prop 65
WARNING
ATTN STATE OF CALIFORNIA CONSUMERS
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Full-width differential / lower control arm crossmembers provide lateral rigidity.
Precision cast steering knuckles included.
Load bearing bracketry made of .25" thick steel plate and/or heavy wall rectangular tubing.
Front and rear Superlift shocks included.
Includes front brake hose relocation hardware.
Tire
Wheel
Backspacing
Offset
33 x 12.5
-
3.75
-
IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.