4in Dodge Lift Kit | Gas or Eco Diesel

4in Dodge Lift Kit | Gas or Eco Diesel

Starting At*: $1,400 - $1,863
Year: Year
Make: Make
Model: Model
Find a Dealer
FREE Shipping on ALL ORDERS!*
*within the contiguous US; ground shipments only.
  • This is a complete knuckle style suspension lift kit for the 2012-2018 Dodge Ram 1500 4WD
  • Provides 4” lift height
  • Includes rear coil springs and rear Superlift shock absorbers or rear 5100 Series Bilstein shock absorbers
What does it include?
  • All brackets, cross-members, shocks, steering knuckles, rear coil springs, rear track bar bracket, and hardware required specific to the 2012-2018 4WD Dodge Ram 1500
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation

Superlift's complete knuckle style suspension lift kit for the 2012-2018 Dodge Ram 1500 4wd, providing 4” of lift height and a choice of rear Superlift shock absorbers or rear 5100 Series Bilstein shock absorbers.

  • Replacement knuckles yield best possible alignment specs. Front track width is not increased and factory turning radius is retained.
  • Front lower control arm crossmembers laser cut from 3/16" material.
  • Belly pan, constructed of 1/4" material, connects crossmembers and protects differential.
  • Front anti-sway bar link extensions retain factory "service for life" links.
  • New Superide Dual Rate rear coil springs provide ideal ride, handling and load carrying capability.
  • New bracketry relocates factory rear 4-link points, anti-sway bar links, brake lines and track bar.
  • New rear compression travel-stop brackets.
  • Rear shock options include Superlift or (SS) by Bilstein.
  • Installs easily with only slight trimming and no exhaust or driveshaft modifications.
  • Compatible with Dodge's Electronic Stability Program.
  • Does Fit Eco Diesel

On both lift heights, you have a choice of retaining the factory front strut cylinders, or purchasing Superide SS replacement strut cylinders by Bilstein, which noticeably improve handling at higher speeds. If the factory struts are retained, the lift kit includes Superide rear shocks; SS Bilstein rear shocks are included with the Bilstein SS lift.

With Superlift's replacement knuckle system, laser-cut bracketry relocates the front lower control arms and differential, and a .25" thick bellypan protects the vitals while further increasing overall rigidity. For the rear, new coil springs (not spacers) ensure proper functionality and ride quality.

NOTE: TRX4 and Outdoorsman Models - Both 4" and 6" lift kits fit these models, although an additional part number is required if you are retaining the factory front struts (see Accessories). The additional components are not required with SS Bilstein applications.

NOTE: The TRX4/Outdoorsman factory ride height is approximately 1" taller than the standard Ram, so you will gain 1" less lift than stated. When lifted, the standard Ram 1500 and the TRX4/Outdoorsman ride height is the same.

NOTE: Will not fit Short Bed Standard Cab models due to rear driveline vibration.

 

Tire Wheel Backspacing Offset
35 x 12.5 18 x 9 4.25 - 5 -
35 x 12.5 20 x 9 5 -

 

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

  • Installation time: 9-10 hours
  • Difficulty level: 4 of 5

NOTE: TRX4 and Outdoorsman Models - Both 4" and 6" lift kits fit these models, although an additional part number is required if you are retaining the factory front struts (see Accessories). The additional components are not required with SS Bilstein applications.

NOTE: The TRX4/Outdoorsman factory ride height is approximately 1" taller than the standard Ram, so you will gain 1" less lift than stated. When lifted, the standard Ram 1500 and the TRX4/Outdoorsman ride height is the same.

NOTE: Will not fit Short Bed Standard Cab models due to rear driveline vibration.

 

WHAT IS THE DIFFERENCE BETWEEN SUPERLIFT AND BILSTEIN SHOCKS?

Superlift shocks are twin tube, velocity sensitive hydraulic shocks. Bilstein shocks are a mono-tube gas pressurized shock. The Superlift shocks are coated with a white paint; the Bilstein shocks are a brushed steel body with a nickel and clear zinc finish. Bilstein shocks are more tuned for the application and offer more precise valving. Additionally, the standard kit reuses the stock front strut; the Bilstein kit replaces the stock strut with the height adjustable Bilstein strut.

Reviews
1 Total
Steven Evans Verified Buyer
5/5
9 April 2017
Great lift.
Very complete kit. Very Happy with lift.
On 4” Lift Kit - 12-18 (19 Classic) Ram 1500 4WD - w/ Bilstein Frt Struts/Rr Shocks

Superlift's Premium Customer Satisfaction

Real Reviews

Our main goal & our most gratifying accomplishments come from achieving 100% customer satisfaction. Don't believe us? Check out what our customers are saying about Superlift. 

Limited Lifetime Warranty

Confidence is included and protection is free. Plus with our Satisfaction Guarantee,  and Limited Lifetime Warranty on all our products we want you to purchase our product with complete confidence because we stand by it

Knowledge Base

Choosing your lift should be easy. Let's us help you become a pro. To learn more about lifts, installation and more check out our FAQ, Dictionary, or feel free just to contact us for support.

Professional Installers

Don't have time to chat or talk? Need expert advice or have installation needs? Locate one of Authorized Dealers near you for superior and professional service.

×