2.5in Ford Lift Kit

2.5in Ford Lift Kit

Starting At*: $361
Year: Year
Make: Make
Model: Model
Find a Dealer
FREE Shipping on ALL ORDERS!*
*within the contiguous US; ground shipments only.
  • This is a Level 1 Lift kit that includes top mount coil spacers for the 2005-2010 or 2011-2016 Ford F-250 Superduty 4wd
  • Provides 2” of front lift height
  • Includes 2” rear lift, front and rear shock absorbers
What does it include?
  • 2.5” upper coil spacer, front and rear shocks, rear 2” block and U-bolt kit.
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation

This is the SUPERLIFT Level 1 2.5 inch lift kit with Superlift shocks for the 2005-2010 or 2011-2016 Ford F-250/F-350 Super Duty 4WD.

SUPERLIFT's Level 1 kits are moderate lift kits for the truck owners who want to retain the vehicle rake.  Level 1 lift kits are specifically packaged for truck owners who are going to be loading the rear of the vehicle frequently & want the vehicle to be closer to ‘level’ after loading it.

SUPERLIFT's Level 1 lift kit provides a moderate lift kit for the front suspension, a rear block & U-bolt kit plus four (4) Superlift shock absorbers with specific compression & extension lengths specific for this application. Priced much less than traditional taller lifts,  this is the simple solution for those wanting an economical & easy way to make room for taller tires for ground clearance or a plus-size the tire & wheel package on the vehicle.

In this Level Kit, the spacers mount the top of the factory coil springs making for an easy install. The front coil spacers are fabricated out of solid 0.25" steel & welded by hand here in-house. This design has structural strength & durability. The protective powder coat finish helps resistance from the on & off-road elements. Includes a pair of Polyurethane isolators that prevent metal-to-metal contact.

This top mount method does not preload the factory coil spring (which would degrade ride quality). No modifications to factory-installed parts are required. The all components are easily removable should the vehicle need to be returned to stock

100% bolt-on super-simple installation. Position SUPERLIFT metal coil spacer on top of the factory coil spring’s rubber isolator. Position new SUPERLIFT Polyurethane isolator on top of the coil spacer, then slide the coil assembly back into position.

Included in this system is a set of four (4) Superlift hydraulic shocks absorbers. Superlift shock absorbers are designed to provide excellent ride quality, durability and longevity. They feature 10-stage, velocity-sensitive valving for maximum control on or off-road without sacrificing a comfortable ride. Shock resistance is continually adjusted, depending on the terrain and vehicle speed.

Features:

  • Coil spacers mount on top of the factory coil springs.
  • Polyurethane isolators provide a smooth & quiet ride as the suspension cycles.
  • 100% bolt-on super-simple installation. Installs with basic hand tools.
  • Maintains factory ride quality
  • Ideal for restoring height lost from a heavy front bumper, winch/bumper combo or snow-plow.
  • Easily removable should the vehicle need to be returned to stock.
  • Includes detailed instructions suitable for do-it-yourselfers (DIY) or for installers alike. This is a Super-EZ install.
  • Front: Fabricated coil spring spacer (1 Pair); Polyurethane isolator for coil spacer (1 Pair); Superlift Shocks (2).
  • Rear: Rear block kit; steel block plates (2); U-bolts (4); heavy-duty flat washers (8); U-bolt long nuts (8); tie bolts & nuts (4); Superlift Shocks (2).

NOTE: Coil spacer thickness & lift is not a 1 to 1 ratio due to the suspension geometry.

Tire Wheel  Backspacing Offset
33 x 12.5 Stock - -

 

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

  • Installation time: 3 hours
  • Difficulty level: 2 of 5

NOTE: Coil spacer thickness & lift is not a 1 to 1 ratio due to the suspension geometry.

Reviews
2 Total
Jacob W. Verified Buyer
4/5
24 October 2018
Super easy, looks great
On 2.5" Level 1 Lift Kit - 11-16 F-250 4WD
Benny Y. Verified Buyer
4/5
26 November 2017
f-250 2 1/2 lift
Good service, informative staff that seemed to listen to the issues. Long wait on the phone sometime... Read More
On 2.5" Level 1 Lift Kit - 11-16 F-250 4WD

Superlift's Premium Customer Satisfaction

Real Reviews

Our main goal & our most gratifying accomplishments come from achieving 100% customer satisfaction. Don't believe us? Check out what our customers are saying about Superlift. 

Limited Lifetime Warranty

Confidence is included and protection is free. Plus with our Satisfaction Guarantee,  and Limited Lifetime Warranty on all our products we want you to purchase our product with complete confidence because we stand by it

Knowledge Base

Choosing your lift should be easy. Let's us help you become a pro. To learn more about lifts, installation and more check out our FAQ, Dictionary, or feel free just to contact us for support.

Professional Installers

Don't have time to chat or talk? Need expert advice or have installation needs? Locate one of Authorized Dealers near you for superior and professional service.

×